- Angle Bracket
- Vertical Profile Section
- Stainless-Steel Staple
- Pressure Spring
- Screw Fittings
Natural Stone, Ceramic, Polymer Concrete, Slate, etc.
Maximum Thickness, Visible Fixing: 20 mm.
Maximum Thickness, Concealed Fixing: 40 mm.
Fixing system for the installation of heavy, ventilated frontages This range has been designed to bear the weight of large-sized sections. The staple used to hold the section of frontage only needs to be rotated through 90º to engage it with the vertical profile section. Once it has been fitted, it can be moved vertically with respect to the profile section. The section can be fixed in place without any need for screws or bolts, which makes it easier to install. This staple is a key system component, as it carries the weight of the section of frontage. For this reason, it is made of 2mm-gauge stainless steel and reinforced with stiffeners at its critical points in order to increase its load-bearing capacity. The central staples consist of two interlocking sections, the bottom of which can be removed with ease to help with the task of replacing the section of frontage.